For "Ivsom" the following results were found: 63 products
Spare jingle for Ivsom Rocar
€11.00*
Spare jingle combination for wood stick Mocidade rocars - for hardcore players!
If you play and practise a lot of Samba, you will sooner or later notice that the holes in your jingles get bigger and the jingles get little cracks around the hole in the middle. The abrasion occurs due to the constant shaking movement and initially does not affect your instrument. But after a while, you will hear that the sound changes. Especially when playing stops and breaks, the jingles with enlarged middle holes will produce a reverberant sound. This is typical for zinc sheet jingles which sambistas like to choose for their authentic dry Rio style sound, nevertheless, this type of metal reacts with abrasion. If you notice any visible or audible changes, it might be time to renew your jingles. With this spare part jingle combinations it is a child's play - take the screws out of the wood stick, replace the screws and the jingles - all done.You will be amazed about the improvement of the sound!
For Ivsom Mocidade rocars!!
DEAL
DEAL | Surdo Beater RIO Médio black
€9.60*
€14.00*
(31.43% saved)
Original Rio style Samba beaters - perfect for hide heads - medium sized, allrounder!Hard beaters with only very little padding get the richest sound out of hide heads. The heartbeat of your bateria comes from the bass corners - the surdos de marcação, whilst the rhythmic 'ornaments' and syncopations are played by the terceira. This beater has a medium size which you may use for any of those sizes. Sambistas with smaller hands might find this size more comfortable than the large Marcação mallets, respectively for some people the regular terceira beater size is too small. The Médio beater has a medium large, unpadded head and semi-long hard-wood handle.Ideal as:surdo beater for the voices of surdo de primeira and surdo de segunda and also the terceira voice in Rio style Samba. The long hard-wood handle and hard head help produce rich bass tones on hide heads.Please remember:This type of beater should only be used on hide heads (animal skins). Heads made from nylon, korino (nappa), vintage or similar types of surdo heads will suffer dents or might even break.
Caixa de Guerra 12''x17cm steel sheet
€110.00*
Caixa de Guerra 12''x17 cm - galvanised steel sheet with 6 strings!A delicacy for fans of steel sheet sound!Shells made of steel sheet have more compound and less body sound, meaning that it sounds less metall-like and has less overtones than e.g. aluminium instruments. The price is a few additional gramms to carry and for sure are prettier caixas than this one. But: the sound is spectacular: crispy, dry, yummy.Special edition by IVSOM!As usual with all IVSOM instruments, the tension rods are screwed down perfectly flush with the fittings in the tension hoop. It only sticks out very little over the tension bracket on the side of the nuts. All important details such as a smoothed out rims for ideal skin fitting, string accommodation, tension rings, threads etc. are neatly manufactured in the usual good quality IVSOM manner. Amongst others, IVSOM provides the Samba school Mocidade Independente de Padre Miguel in Rio de Janeiro with his instruments. Being a mechanic and a caixa player, he disposes of ideal abilities for building good quality Samba instruments.
Caixa de Guerra 12''x17cm
€136.01*
Caixa de Guerra 12''x17 cm - aluminium - with 6 strings! Smart classical sized IVSOM caixa. Traditional Rio Samba instrument for playing either 'em cima' (up) or down. Yellow galvanised hardware - stylish caixa with rich, dry, authentic Rio sound!As usual with all IVSOM instruments, the tension rods are screwed down perfectly flush with the fittings in the tension hoop. It only sticks out very little over the tension bracket on the side of the nuts. All important details such as a smoothed out rims for ideal skin fitting, string accomodation, tension rings, threads etc. are neatly manufactured in the usual good quality IVSOM manner.Amongst others, IVSOM provides the sambaschool Mocidade Independente de Padre Miguel in Rio de Janeiro with his instruments. Being a mechanic and a caixa player, he disposes of ideal abilities for building good quality Samba instruments.
Frigideira Inox with beater inox
€59.00*
Frigideira - special effect for Rio Samba bateriasA frying pan played with a special stick? The frigideira is quite an extraordinary instrument! Give your bateria the ultimate kick!With the small pan sized for a single fried egg you can occasionally add a light, penetrant and tinkling sound effect to your bateria. The pan is convex-shaped on its base, like this it is easier to play the typical playing technique, which is similar to playing the turning technique on a tamborim. You turn the little pan back and forth and make contra movements with a stick which has a hard tip. Usually, telecoteco variations are played. The technique is quite unique and needs lots of practice to play tight, especially as the sound is very dominant. Guaranteed fun effect and you will be the highlight of your bateria!In any case an eye- and ear catcher!Comes with a nylon stick and a metal tip!
Tension rod Repinique 31cm, yellow
€7.00*
Spare part for Ivsom repinique - tension rod 31cm, yellow galvanizedIvsom tension rods have threads on both sides and therefore only fit Ivsom instruments. The rod comes without a nut.
Tension rod Caixa 20cm, yellow
€6.00*
spare part caixa - replacement tension rod for Ivsom caixas, 20cm, yellow galvanised
Chocalho mocidade
€72.00*
Chocalho / Rocar Mocidade with hand-painted wooden handle - 20 pairs of zinc sheet jingles (55 individual platelets)The allstar-favourite amongst the chocalhos, hand-painted in the Mocidade Style, with classical galvanised jingles that sound so authentic that you will think you are in the middle of a bateria rehearsal in Rio. The instrument comes with anatomical shaped handles for perfect grip, clean processing and a good portion of style. Its weight is well balanced so if you want you can pull off a whole load of tricks for your audience. A real chocalho pro knows the craziest tosses, flips and direction changes in the middle of the groove. We can just bow our heads marvelling about such creativity, and recommend the instrument!Zinc sheet jingles - extraordinary sound but dirty fingers due to abrasion!
Repinique Mor 14''x50cm
€218.00*
Repique Mor 14'' x 50 cmColloquially called the 'thick cigar' (charuto), the 14'' repique mor is more of a loner in Europe, whilst in a Rio Samba bateria you might see several of them played together.
It has a 14'' diameter and also a higher shell, so it is two inches bigger than a regular 12'' repinique. The playing technique is pretty much the same. The charuto´s sound is deep and not as dingling as a normal repinique. Played well it brings a totally beautiful soundscape to your bateria. The sound is somewhere between a repinique and a high pitched surdo, an absolutely unique frequency which comes through especially when playing calls and solo parts in the bateria.Stylish repique mor and typical IVSOM design with yellow galvanised hardware.Beautiful instrument with a present sound.The solid aluminium shell as well as all technical details are in well-established IVSOM quality. The tension rods are screwed down flush with the fittings in the ring. Smoothed out rims for ideal skin fitting, tension hoops, threads etc. are neatly manufactured.
Amongst others, IVSOM provides the sambaschool Mocidade Independente de Padre Miguel in Rio de Janeiro with his instruments. Being a mechanic and a sambista himself, he has ideal knowledge and abilities for building high quality Samba instruments.
Caixa de Guerra 12''x17cm snare wires+strings
€143.00*
Brand new from Rio´s special request Samba kitchen:The caixa de guerra 12'' x 17cm with strings and snare wires!Standard version with stringed batter head and snare wires on the resonance head. A really flexible instrument for Rio style baterias, especially if you only have a few caixas in your group. If you only have 1-3 caixa players, the sound is often quite thin. With a double string caixa and its snare wire feature a new sound spectrum appears, supporting the white sound effect. Experiment in different sound directions and find out which is the best 'molho' (juicyness of sound) for your group:Batter head - resonance: This combination contains more snare wire character, the caixa ís not tuned as high as standard caixas, yet more density of white sound sppears - juicy!Batter head - batter head: Try changing the resonance head for a normal nylon head. You can pitch up the caixa to the typical high Rio style level to have a dryer sound with more string than snare wires - fat sound!
Caixa de Guerra 12''x17cm double stringed
€144.00*
Double stringed 12'' x 17cm caixa by IVSOMRio style caixa players listen up:Twice as many strings for twice as much sound!This beauty has 6 strings on the batter side and 6 more strings on the inside of the resonance head.The strings on the inside of the resonance head have a muffling effect, producing a massive dry sound. The snare-sound is simply doubled!Double stringed - double sound!An aspect for fine ears: often the typical Rio-style caixas have an annoying overtone, which automatically appears when you start playing the instrument. The double stringed caixa intuitively sounds more muffled due to the strings strapped to both heads. With this, disturbing side effects have no chance. The caixa sounds super dry, just the tone we´re searching for for a Rio style bateria. By the way, this caixa even sounds great if it is not pitched too high!Obvious fact is - this is a Rio Style caixa with massive and super sound! Samba trend and design by IVSOM for XL-sound!
Tarol 12''x10cm
€132.00*
Tarol 12'' - Rio Samba CaixaTypical Ivsom - cool design, perfect construction and great sound!The tarol is usually carried on a one-hook shoulder strap (half-high) and is played slightly lateral underneith the armpit, or emcima - like on the video. Often, different patterns are played on a tarol. This one has an exceptional sound, especially if you go for a high tuning. Due to its shorter shell is has less sustain than caixas with higher bodies. The yellow galvanised hardware is a typical Ivsom thing, a very stylish drum!
Chocalho salgueiro
€72.00*
Chocalho / Rocar Salgueiro with hand-painted red and white wooden handle and 20 pairs of zinc sheet jinglesThe allstar-favourite amongst the chocalhos, Salgueiro style hand painted with classical galvanised jingles that sound so authentic that you'll think you are in the middle of a bateria rehearsal in Rio. The instrument comes with anatomical shaped handles for perfect grip, clean processing and a good portion of style. Its weight is well balanced so if you want you can pull off a whole load of tricks for your audience. A real chocalho pro knows the craziest tosses, flips and direction changes in the middle of the groove. We can just bow our heads marvelling about such creativity, and recommend the instrument!Zinc sheet jingles - extraordinary sound but dirty fingers due to abrasion!
Tension rod Surdo 52cm yellow
€5.00*
Spare part for surdo - tension rod 52 cm, yellow galvanisedIvsom tension rods have threads on both sides and therefore only fit Ivsom instruments. The rod comes without a nut.
Tamborim 06''
€62.00*
Ribbed aluminium tamborim with 6 hooks - absolute Rio style!
Ivsom is a stylish manufacturer from Rio with a lot of experience in building high quality Samba instruments and close contact to musicians and sambistas from the scene. Here he has developed a professional, robust tamborim which you can easily pitch up high. Excellent and very dry sound just the way the Samba schools in Rio like it! 6 hooks are suitable for those tamborim players who prefer larger gaps inbetween the hooks. For beginners this tam is just as recommendable as for the pros who are already technically fit and know the turning techniques, you will love it! The tamborim is especially thick-walled and has a high percentage of frame in its sound. Authentically Rio!
Tamborim hook with nut 5,1cm
€3.80*
Spare part: hook for tamborim with nut - length: 5,1cmAlways good to have - spare parts for your instrument!Lug with nut for Ivsom tamborim
Repicaixa 12''x28cm
€184.00*
Repicaixa - 2 in 1 hybrid repinique with strings - 12'' x 27 cm - IVSOM
The hybid repinique is a total eyecatcher, stylish and in typical IVSOM design with polished aluminium and yellow hardware.
On one side, the repinique sounds like a totally normal repinique with some background caixa white noise. Turn the hybrid repinique around and play on the side of the strings - it will sound like an amplified caixa! The high shell enlargens the volume of the resonance body, so you get more sound volume, too and add a good portion of caixa crispiness to it!
The solid aluminium shell as well as all technical details are in well-established IVSOM quality. The tension rods are screwed down flush with the fittings in the ring. Smoothed out rims for ideal skin fitting, tension hoops, threads etc. are neatly manufactured.Amongst others, IVSOM provides the sambaschool Mocidade Independente de Padre Miguel in Rio de Janeiro with his instruments. Being a mechanic and a sambista himself, he has ideal knowledge and abilities for building high quality Samba instruments.
Repinique 12''x27cm steel sheet
€128.00*
Repinique 12'' x 30 cm - galvanised steel sheet, IvsomSteel sheet instruments are the classical old school type of Samba instruments. They are not particularly pretty but have an amazing sound. The material is simple - galvanised steel sheet with no extras, plain and compressed sound power for Rio sambistas and also Samba Reggae players. 6 rods are the standard for Rio Samba, if you play with the rods up, you 'll have enough space for your hand inbetween.The typical sound of steel sheet instruments is somewhat rough, voluminous, powerful and makes crispy calls and tinkling rimshots a real pleasure. Steel sheet weighs more than aluminium or inox but makes up for it with incredible sound. Steel sheet drums won't win a beauty contest - although having nice Ivsom details - the surface will loose its gloss with the time and will turn matt. Steel sheet is also cheaper than aluminium, you'll get every penny worth with this repinique.A classic!
Furacaixa 12''x17cm
€148.00*
Furacaixa 12'' x 17cm - the caixa with resonance holes
A perforated shell? A caixa with holes? After the caixa vazada (the bodyless caixa), Ivsom has developed another spectacular instrument that not only impresses with a witty look but also with a top-quality sound. Due to the perforations, the furacaixa has an open sound similar to the caixa vazada. On the one side, the holes function as amplifier, so the caixa sounds really loud, and on the other hand like a monitor, you hear yourself playing in a bateria a lot better. The rims on the caixa have a strong shell sound just like normal caixas. Another real treat for caixas players, especially for those who like to play em cima (above). The furacaixa sound has the typical Ivsom-style dry and crispy sound and extremely little sustain. Like all Ivsom instruments, the lugs are screwed flush into the brackets of the rim. All important details such as the rim on which the head sits on, the string bed, rims, threads etc. are well manufactured and easy to handle (no squeaking!). The hardware is galvanized (yellow).
IVSOM, among other supplier, builds instruments for the Samba school of Mocidade Independente de Padre Miguel in Rio de Janeiro. As a mechanic and caixa player himself, the producer has the ideal skills to build high quality Samba drums.
Nut for surdo, caixa, repinique, timbal
€2.30*
Replacement nut standard length from Ivsom with inch thread for surdo, caixa, repinique, timbal, cuica, repique de mão, rebolo, tan tan.Length: 1,5cm
Repique de Anel 12''x27cm
€205.00*
12'' Repique de Anel - aluminium shell with hide heads on both sides and white hardware elementsAnel means ring. The repique de anel is a hand drum which you'll see in Pagode groups. The drum has skins on both sides, is also played on both sides and - as the name indicates - a ring for creating effects on the shell is often used. Quite similar to the repique de mão, contrarhythms are played on the outer shell. If you wear a ring, they sound sharper and especially pretty. Some people also stick coins or metal pieces directly on the outside of the shell with some tape. The rattling creates some great effects while playing the contrarhythms with one hand. You can find the repique de anel in Pagodes as well as Samba stage gigs, any kind of Samba de mesa and even in Samba Pop.
Hide head 18''
€50.00*
Head 18'' hide head (natural skin) - aluminium rimInformation about mounting hide heads:Natural heads tend to twist when they are unmounted due to different air humidity and temperature. When you are ready to put the head on your instrument and see that it is twisted, moisten (not soak!) the head carefully with a kitchen sponge, then put it on a flat surface and push the drum shell in the rim from above. Put your drum loosely back together and wait until the head is dry before putting any tension on it. Let it dry slowly in the air (best overnight), don't use heaters, hairdryers and don't leave it in the sun as it will make the head brittle and prone to tear.Information for hide heads on aluminium rims:Natural heads tend to twist when unmounted, especially with when temperature and humidity changes. This can happen as well with heads on wood rims as with skins in aluminium rims. The aluminium hoops are grouted in a way that leaves a small open joint gap. This is not a defect nor a broken seam, but a tiny tolerance which is there on purpose so that the head can expand or tighten without damaging the hoop or the head when air moisture changes. If you have received a twisted head with an open gap on the aluminium rim, then that is quite normal and with only a few steps the head will easily fit on your instrument shell: Slightly moisten the head, wait a couple of minutes, then fit it on the shell and put your instrument back together loosely. Only put tension on the head once it has dried completely and in a natural way; this will usually take overnight. As soon as there is tension on the head, wrinkles and the twist will disappear and the head will easily adjust to the shape of the instrument shell. If you have any questions about mounting a head, please contact us.Purchasing replacement heads:If you are buying a replacement head for your instrument, we advise that you get a head from the same brand as your instrument as they should fit without any trouble. If you buy a head from a different brand, you might find that the fit slightly differs or even doesn't go on the shell well or at all. Please understand that we cannot offer warranty in this case.
Hide head 22''
€59.00*
Head 22'' goat skin - aluminium rim - IVSOMInformation about mounting hide heads:Natural heads tend to twist when they are unmounted due to different air humidity and temperature. When you are ready to put the head on your instrument and see that it is twisted, moisten (not soak!) the head carefully with a kitchen sponge, then put it on a flat surface and push the drum shell in the rim from above. Put your drum loosely back together and wait until the head is dry before putting any tension on it. Let it dry slowly in the air (best overnight), don't use heaters, hairdryers and don't leave it in the sun as it will make the head brittle and prone to tear.Information for hide heads on aluminium rims:Natural heads tend to twist when unmounted, especially with when temperature and humidity changes. This can happen as well with heads on wood rims as with skins in aluminium rims. The aluminium hoops are grouted in a way that leaves a small open joint gap. This is not a defect nor a broken seam, but a tiny tolerance which is there on purpose so that the head can expand or tighten without damaging the hoop or the head when air moisture changes. If you have received a twisted head with an open gap on the aluminium rim, then that is quite normal and with only a few steps the head will easily fit on your instrument shell: Slightly moisten the head, wait a couple of minutes, then fit it on the shell and put your instrument back together loosely. Only put tension on the head once it has dried completely and in a natural way; this will usually take overnight. As soon as there is tension on the head, wrinkles and the twist will disappear and the head will easily adjust to the shape of the instrument shell. If you have any questions about mounting a head, please contact us.Purchasing replacement heads:If you are buying a replacement head for your instrument, we advise that you get a head from the same brand as your instrument as they should fit without any trouble. If you buy a head from a different brand, you might find that the fit slightly differs or even doesn't go on the shell well or at all. Please understand that we cannot offer warranty in this case.
Legset Surdo
€104.00*
Legset for surdos - for all brandsFor self-assembly!Practical, always with you, quickly assembled and stable!3 metal feet are mounted on the shell and can be adjusted in the right height for you. If at some occasion you don't want to use the legset, e.g. because you want play at a parade, you can simply pull the legs out of the clamps and attach them again later.total length legs: 65 cmSelf-assembly instructions:The assembly requires some technical knowledge, but with some planning and suitable tools you can do it yourself. The shell must be drilled at 3 positions. In order to determine the exact positions, please consider beforehand where exactly and how the legs will fit. For example, there mustn't be any of the lugs in the way. The height must also be determined beforehand. For drilling, the surdo needs to be completely dismantled; please remove both heads, rims and all tension rods. Mark the places where you want to insert the legset clamps and drill the perforations. Then simply place the clamps on the shell and screw the nuts to the brackets from the inside. When all three brackets are attached, you can push the legs through, adjust them to the height you want and you're all ready to go.You would rather not do the assembling yourself? No problem, we'll do it for you - just add the assembly service!
Cuica gambito bamboo stick with string
€7.00*
Gambito with string for cuica Your cuica stick broke? Never mind, you can exchange it!Take the cuica skin with the broken stick off the shell, wetten the cuica skin in the middle until it get´s soft, then carefully open the knot with which the gambito is tied in and take out the leftovers of the stick.Carefully sand down the new gambito a little bit with fine sandpaper depending on how thin you like to play it. The thinner the stick, the nicer your cuica skin will respond, but the stick will also get more fragile. Then place the gambito in the middle of the soaked skin and tie a new knot. The skin has to be really wet and soft in the middle, otherwise you won´t be able to put in the new stick. The best is, you get somebody to help you. One person can hold the gambito and the skin, while the other can tie a tight knot. With a bit of practice you´ll soon get the hang of it! Tipp:The cuica skin with the new gambito will need at least over night to dry (important! don´t use hairdryer, heating or sun to dry the head as it will get brittle and tear), therefore cuiqueiros usually take a spare head with a tied-in stick with them. If it does happen, that your gambito breaks during a gig, you are prepared and just put on your spare cuica head. Then you have time to change the broken gambito and until the next day your new 'exchange' head will be dry and ready again.
Chocalho compact
€68.00*
Compact chocalho / rocar with hand-painted wood bar in blue and white, 16 pairs of sheet zinc jinglesThe all-star favourite among the chocalho range, a size smaller and also a little less noisy and lighter, hand-painted, the classic zinc sheet jingles that sound as authentic as if you were standing in the middle of a bateria rehearsal in Rio. Anatomically shaped wooden handles that sit perfectly in the hand, clean workmanship and a good portion of style make this instrument in compact format - suitable for hand luggage!Zinc plated jingles - great sound but dirty fingers due to material abrasion!
Chocalho Acústico
€99.00*
Chocalho / Rocar Acústico with aluminium body - 20 pairs of galvanised zinc sheet jingles (55 individual platelets)Now with less weight!The revised model of this chocalho has come with 2 big improvements: the handles are now made of plastic and therefore more comfortable to hold. Much more important is that the manufacturer has reduced the weight to a level that this massive aluminium chocalho in no way stands behind the wooden models. If you are into fat, authentic chocalho sound, you've found the right one!Classical zinc sheet jingles that sound so authentic that you might think you are in a bateria rehearsal somewhere in Rio. An anatomical shaped handel for perfect handling, clean processing and good portion of style with glittering hologram sheeting. The shell of the rocar is completely made of aluminium and weights a little more than the wood modell. To save weight, several large holes are punched out of the middle of the shell. This also amplifies the tone coming from the middle of the instrument and is then thrown back through the apertures. A kind of a sound chamber it is, a chocalho which amplifies itself! The handles are attached to the main body with screws.A loud, penetrant and authentic chocalho!Zinc sheet jingles - great sound but dirty fingers: zinc sheet produces abrasion!
available as a variant
Head 12'' Super Nylon
€15.00*
12" Supernylon head by Ivsom, percussion head for caixa, repinique, charutinho, timbal, repique mor etc.Fibreglass coated head with dry, short and crisp sound characteristics. The fibreglass coating on the underside filters out unwanted overtones, so if you like your sound nice and rock-dry and crisp - this is your go-to. Not suitable as a resonance head!
Head 06'' Super Nylon
€10.00*
6" Supernylon tamborim head by IvsomFibreglass coated head with dry, short and crisp sound characteristics. The fibreglass coating on the underside filters out unwanted overtones, so if you like your sound nice and rock-dry and crisp - this is your go-to.
Surdo Beater RIO Marcação
From
€14.00*
Rio Marcação - large original Rio Samba beaters - perfect for hide heads and the low voices (surdo 1+2)With hard, unpadded beaters you get the most beautiful sounds from natural skins. The heartbeat of your batería comes from the two low pitched 'corners', the surdos de marcação. The marcação mallets are perfect for these big bass surdos. Marcação is the name of the two surdos marking the deepest surdo voices (primeira and segunda). They mark the beat in the Samba de Enredo. Hence the name for the matching mallets with large head, long grip and no padding.Ideal as: Surdo beaters for the surdo de primeira and surdo de segunda in Rio Samba batucadas. Long hardwood handle for optimal leverage and hard head for full basses on hide heads.Please remember:This type of beater should only be used on hide heads (animal skins). Heads made from nylon, korino (nappa), vintage or similar types of surdo heads will suffer dents or might even break.
available as a variant
Surdo Beater RIO Terceira
From
€14.00*
Original Rio Samba beater - perfect for hide heads, small hard head, fast rebound for surdo de terceiraThe short and hard wood beater for the surdo de terceira in Rio Samba has the perfect size for the exciting voice of the surdo de terceira - are you ready for this handy little devil? Head and handle are made of hard wood, the head is almost unpadded - ideal for a furious rebound and the typical sound on natural heads. Hard beaters with only very little padding get the richest sound out of hide heads. The rhythmic 'ornaments' and syncopations in the set of surdos are played by the terceira, the highest voice. The rhythms can get really fast and are sometimes even played with 2 beaters. This is why you want terceira beaters to be small, with a hard, unpadded head and a short handle - just like the pros in Rio like and play it.Ideal as:surdo beater for the surdo de terceira in a Rio style Samba bateria. A short handle for good grip and a hard head for rich sound and lightning speed playing on hide heads.Please know:This type of beater should only be used on hide heads (animal skins). Heads made from nylon, korino (nappa), vintage or similar types of surdo heads will suffer dents or might even break.
available as a variant
Head 12'' Nylon
€10.00*
Playing- or resonance head for 12" caixa or repiniqueCaixa head Ivsom - repinique head Ivsom
Rim Caixa 14'' side of nuts for 6 rods
€31.00*
Spare rim for Ivsom Caixa 14'' with threaded brackets, side of nuts, yellow galvanised
Rim Surdo 22'' brackets with threads for 10 rods
€54.00*
Spare surdo rim: Tension ring for Ivsom Surdo 22'', with threaded bracket for 10 rods.
Attention: these rims have no lug slot brackets and only work for Ivsom surdos with threads on both tension rod sides.
Rim Surdo 24'' brackets with threads for 10 rods
€59.00*
Spare surdo rim: Tension ring for Ivsom Surdo 24'', with threaded brackets, for 10 rods.Attention: these rims have no lug slot brackets and only work for Ivsom surdos with threads on both tension rod sides.
Butterfly nut for caixa strainer
€2.00*
Spare butterfly nut with inch thread for caixa strainers of Ivsom caixas
Nut long for surdo, caixa, cuica
€3.00*
Extra long spare brass nut Ivsom with inch thread for surdo, caixa, repinique, timbal, cuica, repique de mão, rebolo, tan tan.Length: 2.4 cm
Repinique Vazado 12''x27cm
€168.00*
Repinique vazado 12'' x 27,5 cm - the repinique with no shell!A version of the repinique that caused a furore in the Samba schools: drums without a shell!A flat iron frame creates the illusion of a closed corpus and produces a sensationally different sound: tremendously loud and direct, without the restriction of an aluminium body. As with all IVSOM instruments, the tension rods are screwed down flush with the fittings in the ring. All important details such as smoothed out rims for ideal skin fitting, tension hoops etc. are neatly manufactured in the usual good quality manner we are used to by IVSOM.IVSOM is one of the main suppliers of the Samba school Mocidade Independente de Padre Miguel in Rio de Janeiro. Being both a sambista and a mechanic, he knows exactly what it needs to make good samba instruments!
Repinique Mor 16''x50cm
€224.01*
Repique Mor 16'' x 50 cmWith its 16 inches, the repique mor has a much larger diameter than regular sized repiniques, its tone is correspondingly lower which makes it stand out from the other frequencies in a bateria. It is played like a normal repinique, whereby there are special patterns that are assigned to it. Its tone is low and not as ringing and penetrant as the smaller repinique sizes. Well played, it brings a rich, fat sound base into a Rio style bateria, its sound is quite a unique frequency, which is especially effective with calls and solos.Stylish and in typical Ivsom look with yellow galvanised hardware. Beautiful instrument with powerful sound. Well manufactured aluminium shell and with the typical technical details of Ivsom instruments: the tension rods are screwed flush in the brackets of the rim. Smoothed out rims for ideal skin fitting, tension hoops, threads etc. are neatly manufactured.Amongst others, Ivsom provides the sambaschool Mocidade Independente de Padre Miguel in Rio de Janeiro with his instruments. Being a mechanic and a sambista himself, he has ideal knowledge and abilities for building high quality Samba instruments.
Reco Reco aluminium 3 springs
€63.00*
RecoReco with 3 springs - Ivsom
An authentic Rio-style reco reco from Rio. If you have ever seen a typical live Pagode in Rio, you will remember the sound of the reco reco - dry, sharp, dirty and a bit like a not-so-loud caixa - this is exactly what the small instrument by Ivsom sounds like. It is quite common to muffle the reco reco with some tape on one or even on both sides to create as little sustain as possible. You can also muffle it just with your thumb. A very versatile and handy instrument that fits in any bag and is played with a thin metall stick similar to a guiro!
Repinique 12''x27cm aluminium
€157.00*
Repinique 12'' x 27 cm - yellow hardware, IvsomStylish and in typical IVSOM manner yellow galvanised hardware.Beautiful instrument with a light but present sound.The solid aluminium shell as well as all technical details are in well-established IVSOM quality. The tension rods are screwed down flush with the fittings in the ring. Smoothed out rims for ideal skin fitting, tension hoops, threads etc. are neatly manufactured.Amongst others, IVSOM provides the sambaschool Mocidade Independente de Padre Miguel in Rio de Janeiro with his instruments. Being a mechanic and a sambista himself, he has ideal knowledge and abilities for building high quality Samba instruments.
Hide head 20''
€55.00*
Head 20'' goat skin - aluminium rim - IVSOMInformation about mounting hide heads:Natural heads tend to twist when they are unmounted due to different air humidity and temperature. When you are ready to put the head on your instrument and see that it is twisted, moisten (not soak!) the head carefully with a kitchen sponge, then put it on a flat surface and push the drum shell in the rim from above. Put your drum loosely back together and wait until the head is dry before putting any tension on it. Let it dry slowly in the air (best overnight), don't use heaters, hairdryers and don't leave it in the sun as it will make the head brittle and prone to tear.Information for hide heads on aluminium rims:Natural heads tend to twist when unmounted, especially with when temperature and humidity changes. This can happen as well with heads on wood rims as with skins in aluminium rims. The aluminium hoops are grouted in a way that leaves a small open joint gap. This is not a defect nor a broken seam, but a tiny tolerance which is there on purpose so that the head can expand or tighten without damaging the hoop or the head when air moisture changes. If you have received a twisted head with an open gap on the aluminium rim, then that is quite normal and with only a few steps the head will easily fit on your instrument shell: Slightly moisten the head, wait a couple of minutes, then fit it on the shell and put your instrument back together loosely. Only put tension on the head once it has dried completely and in a natural way; this will usually take overnight. As soon as there is tension on the head, wrinkles and the twist will disappear and the head will easily adjust to the shape of the instrument shell. If you have any questions about mounting a head, please contact us.Purchasing replacement heads:If you are buying a replacement head for your instrument, we advise that you get a head from the same brand as your instrument as they should fit without any trouble. If you buy a head from a different brand, you might find that the fit slightly differs or even doesn't go on the shell well or at all. Please understand that we cannot offer warranty in this case.
Hide head 24''
€64.00*
Head 24'' goat skin - aluminium rim - IVSOMInformation about mounting hide heads:Natural heads tend to twist when they are unmounted due to different air humidity and temperature. When you are ready to put the head on your instrument and see that it is twisted, moisten (not soak!) the head carefully with a kitchen sponge, then put it on a flat surface and push the drum shell in the rim from above. Put your drum loosely back together and wait until the head is dry before putting any tension on it. Let it dry slowly in the air (best overnight), don't use heaters, hairdryers and don't leave it in the sun as it will make the head brittle and prone to tear.Information for hide heads on aluminium rims:Natural heads tend to twist when unmounted, especially with when temperature and humidity changes. This can happen as well with heads on wood rims as with skins in aluminium rims. The aluminium hoops are grouted in a way that leaves a small open joint gap. This is not a defect nor a broken seam, but a tiny tolerance which is there on purpose so that the head can expand or tighten without damaging the hoop or the head when air moisture changes. If you have received a twisted head with an open gap on the aluminium rim, then that is quite normal and with only a few steps the head will easily fit on your instrument shell: Slightly moisten the head, wait a couple of minutes, then fit it on the shell and put your instrument back together loosely. Only put tension on the head once it has dried completely and in a natural way; this will usually take overnight. As soon as there is tension on the head, wrinkles and the twist will disappear and the head will easily adjust to the shape of the instrument shell. If you have any questions about mounting a head, please contact us.Purchasing replacement heads:If you are buying a replacement head for your instrument, we advise that you get a head from the same brand as your instrument as they should fit without any trouble. If you buy a head from a different brand, you might find that the fit slightly differs or even doesn't go on the shell well or at all. Please understand that we cannot offer warranty in this case.
Strainer Caixa 14cm 6 strings
€12.00*
String tensioner Caixa 14 cm - 6 stringsSpare part for Ivsom caixa - strainer 14 cm for 6 stringsFits Ivsom's 12" x 17cm caixas and also the 14" x 17 caixas with strings.
Rim Repinique 12'' brackets with threads for 6 rods
€29.00*
Spare part repinique - rim 12'', side for rods (brackets with threads)The rim with the side of the rods the for the side of your instrument where the lugs go in (not where the nuts go on). That side either has a slit construction or a thread in the brackets. Ivsom instruments use the thread construction.
Rod for Caixa 20cm
€6.00*
Spare part for Ivsom Caixa - Tension rod Caixa 20 cm with threads at both ends.Galvanised steel, rod without nut.
Repicaixa vazada 12''x28cm
€149.00*
Stringed repinique vazada with no shell - 2 in 1 Hybrid Repinique with Caixa strings - 12'' x 27 cm - IVSOMDirect and loud sound - the repicaixa is an absolute eye-catcher, stylish and in signature IVSOM look with vazada shell and yellow hardware.If you play on the side without strings, it sounds like a normal repinique with a casual caixa sound, but the steel frame shell makes it much louder and more direct. Flip the hybrid repinique over to make it sound like an amplified caixa. The longer shell increases the volume of the resonance body, so you have a larger sound volume and a lot more punch in the sound! Well-made components and materials, and the usual technical details of IVSOM instruments: the rods are screwed flush into the brackets of the rim. The inner head rim, the tension rims, smooth-running threads, etc. are easy to handle.IVSOM is, among others, a supplier to the Samba school Mocidade Independente de Padre Miguel in Rio de Janeiro. As a mechanic and active sambista, he has the ideal skills and knowledge to build great Samba instruments.
Tarol vazada 12''x10cm
€109.00*
Tarol Vazado 12'' x 17 cm - the tarol with no body! A real eyecatcher!In Rio, the latest version of this instrument is the newest blowoff and ist literally shaking up the sambaschools: The Son Duplo tarol with no body! A flat iron support frame creates the illusion of a closed corpus. The caixa has the same size as the instruments made from aluminium. The sensational sound however differs significantly. Tremendously direct and loud, without the restriction of the surrounding shell.A flash for all tarol playersThe sound can escape directly, it literally reaches you directly meaning that even if you play in a strong bateria you will be able to easily hear yourself!The tarol vazado sounds extra-dry and has due to its short body extremely little sustain!As usual with all IVSOM instruments, the tension rods are screwed down flush with the fittings in the ring. All important details such as a smoothed out rims for ideal skin fitting, string accomodation, tension hoops, threads etc. are neatly manufactured in the usual good quality IVSOM manner. Amongst others, IVSOM provides the sambaschool Mocidade Independente de Padre Miguel in Rio de Janeiro with his instruments. Being a mechanic and a caixa player, he disposes of ideal abilities for building good quality Samba instruments.
Rim Caixa 12'' side of nuts for 6 rods
€31.00*
The side with nuts is the side of your instrument where the nuts are screwed onto the rim.
Rim Repinique 12'' side of nuts for 6 rods
€29.00*
The side with nuts is the side of your instrument where the nuts are screwed onto the rods.
Frigideira stick
€13.99*
Twin-Tip polyethylene beater with metal tips – perfect for frigideira in Rio Samba bateriasLooking for the ideal beater for your frigideira? This twin-tip polyethylene beater with metal tips on both ends is specially crafted to bring out the unique, piercing, and ringing sound effects that make the frigideira an unforgettable addition to any Rio Samba bateria.The frigideira, an instrument resembling a tiny frying pan, delivers bright, resonant tones that add a playful Telecoteco rhythm to your Samba sound. This specialised stick is designed for the classic turning technique, allowing you to produce counter-movements and achieve those signature variations with precision.Handcrafted for durability and performance, this beater is essential for mastering the frigideira and standing out in your bateria. Whether you’re adding shimmering accents to surdo rhythms or creating dynamic transitions, this stick helps you perfect your sound.Take your samba bateria to the next level with this must-have accessory for frigideira players. A real show-stopper!
Surdo Beater RIO Coquinho black
€12.00*
Coquinho - the terceira beater with mini head - perfect for natural skins, smallest size for Surdo de TerceiraHardwood beater with mini head for surdo de terceira in Rio Samba - small hard head for the most spirited voice in Rio Samba - are you fit for this whiz kid? Hard, unpadded head, ideal for fast rebound and powerful sound on hide heads. The rhythmic 'embellishments' and syncopations in Rio Samba are played by the surdo de terceira, the highest voice. Depending on the arrangement, the terceira is sometimes also played with 2 beaters. A hard, unpadded head and long handle is an important piece of equipment for a terceira player. Those who prefer a shorter handle will find this version with the regular RIO terceira mallet.Ideal as:Surdo beater on hide heads for the surdo de terceira, the highest surdo voice in Rio style Samba. Long hardwood handle for extended leverage, good for long playing sessions or parades, optimum grip and hard head for rich sound and lightning-fast rebound on natural skins.Careful:Please only use this type of mallet on surdos with natural skins. Heads made of nylon, korino (nappa), vintage or similar materials require softer mallets and may dent or even break with this mallet.
Surdo Beater RIO Coquinho
€12.00*
Coquinho - the terceira beater with mini head - perfect for natural skins, smallest size for Surdo de TerceiraHardwood beater with mini head for surdo de terceira in Rio Samba - small hard head for the most spirited voice in Rio Samba - are you fit for this whiz kid? Hard, unpadded head, ideal for fast rebound and powerful sound on hide heads. The rhythmic 'embellishments' and syncopations in Rio Samba are played by the surdo de terceira, the highest voice. Depending on the arrangement, the terceira is sometimes also played with 2 beaters. A hard, unpadded head and long handle is an important piece of equipment for a terceira player. Those who prefer a shorter handle will find this version with the regular RIO terceira mallet.Ideal as:Surdo beater on hide heads for the surdo de terceira, the highest surdo voice in Rio style Samba. Long hardwood handle for extended leverage, good for long playing sessions or parades, optimum grip and hard head for rich sound and lightning-fast rebound on natural skins.Careful:Please only use this type of mallet on surdos with natural skins. Heads made of nylon, korino (nappa), vintage or similar materials require softer mallets and may dent or even break with this mallet.
Caixa de Guerra 14''x17cm steel sheet
€149.00*
Samba Reggae Snare 14'' galvanised steel sheet with fixed snare wires (no lifting system) - Ivsom
14'' steel sheet snare for saturated and authentic sounds in Samba Reggae and Afro Samba Blocos! Full, voluminous and present sound with typical Ivsom design and galvanised hardware. Another special feature of this brand are the tension rods, which have rolled threads at both ends, i.e. where the tension rod is normally inserted into a slot, Ivsom instruments are screwed flush into the holding bracket. No sharp-ended lugs sticking into your thighs!
IVSOM from Rio de Janeiro is, besides being a musician himself, a supplier of the Samba school Mocidade Independente de Padre Miguel in Rio de Janeiro. As a mechanic and caixa player at Mocidade, he has the perfect skills to build good quality Samba instruments.
Tamborim 06''
€66.00*
Rio Samba tamborim by IVSOM - 6 lugsIVSOM has developed a tamborim according to the latest Rio Samba standards and trends: a fearly high light-weight frame made of inox with a very pleasant touch and strong sound. Tamborim players are admirably agile, strong of omemory sambistas who remember hundreds of signs and arrangements that go together with the lyrics of the Samba de enredo. The smallest drum in the pool of Samba percussion instruments is at the same time one of the most challenging. Not only that you have to learn different turning techniques and a pile of arrangements, there 's also the synchrone-playing.Authentic Rio-style tamborim - a weapon!
Chocalho acústico som doble
€107.00*
Chocalho som doble – with open metal frameLoud bar chocalho for the real pros among you! Welded metal frame with plastic handles and powerful-sounding jingles. In his workshop in Rio, Ivsom builds authentic Samba instruments that not only have great sound but are also durable and have the typical Ivsom style.