Hide head/replacement head without rim for self-assembly, size 24"

Important information about fitting and mounting hide heads:
Hide heads are moistened during the production in order to make the leather soft for when they are fitted onto their rim. For the self-assembly, please wet the head and use suitable tools to fit the skin onto the rim. Hide heads on rims which are not yet mounted on an instrument, tend to twist due to the differences in air humidity. This is not a defect and will disappear once the head is on the shell, ideally slightly moistened. When you are ready to put the head on your instrument and see that it is twisted, moisten (this time only moisten, not soak!) the head carefully with a kitchen sponge, then put it on a flat surface and push the drum shell in the rim from above. Put your drum loosely back together and wait until the head is dry before putting any tension on it. Let it dry slowly in the air (best overnight), don't use heaters, hairdryers and don't leave it in the sun as it will make the head brittle and prone to tear!

Note about spare parts:

We recommend that you always purchase spare parts of the same brand as your instrument to ensure fit and function. We cannot assume any warranty for different-brand combinations. If you are looking for a spare part that you cannot find on our site, please contact us!